#Word clock synchronization software

The Dante network can derive its master media clock from one of the Tesira systems, but it must then be the master media clock for all other connected Tesira systems.Debraj De.The Dante network can be the master clock for all Tesira systems, or.

If N Tesira systems are connected to the same Dante/CobraNet network, then that network must be the clock source network for at least N-1 of the connected Tesira systems.įor example, if two or more Tesira systems share a common Dante network:

Any media network (AVB, CobraNet or Dante) can have only one master clock source.

The Tesira system will synchronize automatically.

A Tesira system can be synchronized to a 3rd party Dante or CobraNet device by placing the Dante/CobraNet input block on the network assigned as the Clock Master.

An AVB controller, such as Riedel AVB Manager, must be used to configure the Tesira system to synchronize to an incoming AVB stream.

A Tesira system can be synchronized to a 3rd party AVB device by placing an AVB input block on the Clock Master AVB.

A system of Tesira devices may be synchronized to an external, 3rd party device on the selected Clock Master network.

The compiler will automatically set each CobraNet card's conductor priority and each Dante card's Preferred Master flag to ensure that clock propagation on the network matches the Media Networks Diagram.

Clock propagation between Tesira devices on the AVB Default network is managed automatically by the compiler.

The devices on the Clock Master media network will elect the master according to the rules of the protocol, and the Tesira system will propagate that clock to the other media networks. Note: the actual master clock device on the Clock Master network could be a 3rd party device or it could be a Tesira device it doesn't matter. To check clock propagation in a Tesira system, use the Media Network Diagram (System > Media Network > Diagram.). In this way, the Tesira systems takes the clock from the Clock Master network and pushes it to the other media networks. In other words, the Tesira system will be a clock slave on the Clock Master media network, and it will be the clock master on the other media networks. The Tesira system will then synchronize to that device and propagate its clock to the other media networks.

What this setting does is tell the Tesira system where to look for the master clock device. It can take a moment to fully understand the feature, because it works in the opposite way to how it might seem at first glance. Therefore, these options will not apply to these systems.Ĭhecking the Clock Master check box for a media network tells the Tesira system on which network the master clock is located. Note: a system of TesiraFORTÉ devices only may feature one form of digital audio transport protocol, AVB or Dante. Multiple Tesira systems can more easily and flexibly share common network infrastructure.An external media network (i.e., CobraNet, Dante, or 3rd-party AVB) can be assigned at the system's Clock Master, allowing a Tesira system to synchronize to a 3rd-party device or system.A Tesira system can support multiple AVB, CobraNet, and Dante networks.

#Word clock synchronization software

The software supports several features for enhanced audio networking, providing greater flexibility for the design and installation of both single and multi-protocol systems. Tesira systems sharing a common networkĪ notable feature of the Tesira platform is the ability to combine and synchronize audio from AVB, Dante, and CobraNet sources in a single system, even a single device.